User Manual

12 - RocketLinx ES7110 and ES7110-VB User Guide: 2000552 Rev. C Front Panel and LEDs
Hardware Installation
Front Panel and LEDs
The RocketLinx ES7110 front panel contains the Ethernet ports and LEDs as shown below.
PoE 1-8 Port Status LED Description
Link/Activity
Green The port is connected.
Blinking Transmitting or receiving packets.
Off The port link is inactive.
Full-Duplex/Collision
Yellow Full-duplex mode connection.
Blinking Data collision.
Off
The link is inactive or operating in
half-duplex mode.
G1/G2 Port Status LED Description
Link/Activity
Green The port is connected.
Blinking Transmitting or receiving packets.
Off The port link is inactive.
Speed
Yellow Full-duplex mode connection.
Blinking
3 blinks per cycle – 1000Mbps
2 blinks per cycle – 100Mbps
1 blink per cycle – 10Mbps
Off The link is inactive.
Power LED
Alarm LED
PoE Status
LEDs 1 - 8
PoE Port
Status LEDs
Gigabit Port
Status LEDs
LEDs Status Description
Power
Green Valid DC input power applied.
Off No power.
Alarm
Red A ports link failure has occurred.
Off No failure has been found.
PoE LEDs Status Description
PoE 1-8
Green The port is delivering PoE power.
Off No PD is attached.