Instruction Manual

DeviceMaster Primo for Pair and Raw Connect Methods 18

Raw Connection - UPD

10. Press the Esc key twice to return to the menu. Select the Monitor option.

11. Review the options, and make any desired changes.

Note: The Connection Status is set to listen. After you restart the device, the

TxChar Count and the Rx Char Count fields display data transfer

activity.

12. Press the Esc key to return to the menu. Select the Restart option to save any

changes.

Raw Connection - UPD

UDP Server Setting the parameters for a UDP Raw Connection requires two procedures.

Follow the UDP Server procedure first, then complete the UDP Client procedure.

1. From the Start menu, select the Run command.

LAN/WAN

Ethernet Hub

RS-232/422/485

serial device

Raw Connection - UDP Example

DeviceMaster

Primo (Multiple)

Mainframe

IP socket

application