Manual

84 - Managing the DeviceMaster LT
DeviceMaster LT User Guide: 2000586 Rev. B
Changing the Bootloader Timeout
8. Click Apply so that the configuration is saved on the DeviceMaster LT.
9. Repeat
Steps 3 through 8 for each port that you want to restore.
Changing the Bootloader Timeout
If SocketServer fails during the upload process, you should change the Bootloader
timeout value to 45 seconds.
Note: The
DeviceMaster LT must be able to communicate using an IP address,
which is compatible with this local network. If necessary, refer to
Configuring the Network Settings on Page 18.
Note: You should return
the Bootloader Timeout value back to 15 seconds after
you upload SocketServer.
Use the following procedure to change the Bootloader timeou
t to 45 seconds. You
can use this procedure to return the Bootloader timeout to 15 seconds after you
have successfully uploaded SocketServer.
1. If necessary, start PortVision DX, from Pr
ograms> Comtrol > PortVision DX >
Po
rtVision DX.
2. Right-click the DeviceMaster LT in the Device T
ree or Device List pane and
click Properties.
3. Type 45 in the Bootloa
der Timeout text box and click Apply.