Manual

76 - Managing the DeviceMaster LT
DeviceMaster LT User Guide: 2000586 Rev. B
Local Using the IP Address or MAC Address
7. Enter the IP Address for the DeviceMaster LT. It is not necessary to enter the
Sub
net Mask and Default Gateway.
8. Click Ok to
close the Add New Device window. It may take a few moments to
save the DeviceMaster LT.
9. If necessary, click Refr
esh for the new DeviceMaster LT to display in the Device
T
ree or Device List panes. The DeviceMaster LT shows OFF-LINE if it is no
t
attac
hed to the network or if an incorrect IP address was entered.
Local Using the IP
Address or MAC
Address
Use the following procedure to add a local DeviceMaster LT to PortVision DX if
you do
not want to scan the network.
1. Locate the network information or MAC
address of the DeviceMaster LT you
wa
nt to add.
2. Access the N
ew Device window using one of these methods:
•Click Add New
> Device in the Manage menu.
• Right-click a folder or a RocketLinx switch in the Device Tree pa
ne
(anywhere in the pane, as long as a DeviceMaster LT is not highlighted and
y
ou are in a valid folder) and click Add New > Device.
3. Select the appropriate DeviceMaster LT in the De
vice Type drop list.
4. Select the appropriate model in the De
vice Model drop list.
5. Enter a friendly device name in the De
vice Name list box.