Manual

124 - Troubleshooting and Technical Support
DeviceMaster LT User Guide: 2000586 Rev. B
Socket Mode Serial Port Testing
Socket Mode Serial Port Testing
This procedure illustrates using Putty, which is available in PortVision DX.
Optionally, you can use any other Winsock compatible application.
Note: The following procedure starts with resetting DeviceMaster LT to factory
default values. You may want to save the DeviceMaster LT socket
configuration using Saving a
SocketServer Configuration File on Page 77.
1. If necessary, install PortVision DX using Installing PortVision DX
on Page 15
and scan the network to locate the DeviceMaster LT that you want to test.
2. Right-click the DeviceMaster LT and click Webpage.
3. Scroll to the bottom of the home page and click Reboot.
4. Click the Set configuration for all ports to factory default settings option and then
click the Ye s Rebo ot button.