Owner's manual

Command Reference Manual
100722A
Conexant
3-63
3.2.10.4 :E - Compromise Equalizer Enable Command
This command is included for compatibility only and has no effect other than returning a result code.
Syntax
:E<value>
Defined Values
<value> Decimal number corresponding to the selected option.
0 :E0 command.
1 :E1 command.
Result Codes
OK 0 or 1.
ERROR Otherwise.
3.2.11 FastConnect Commands
3.2.11.1 $F – FastConnect Control
This command allows configuring of the client modem to connect to a central site modem that supports non-standard V.22
and V.22 bis FastConnect protocols.
Syntax
$F<n>
Defined Values
<n> Decimal number which specifies the initial requested mode of operation when the modem is
operating as the originator. The options are:
0 Normal connection (Default)
1 FastConnect without answer tone
2 Reserved
3 FastConnect with answer tone