Datasheet

PoE Plus Supporting High Power Devices
The Comtrol RocketLinx ES7510-XT managed industrial PoE Plus switch is
designed to meet the high power and advanced management
needs of critical trac applications such as real-time IP video
surveillance and wireless communication utilizing outdoor rated IP cameras
and high power IEEE 802.11 access points. Featuring a rugged design for
harsh environments, intuitive web, CLI, SNMP management options,
power scheduling and eight fully compliant IEEE 802.3at PoE injector ports,
the ES7510-XT is easily installed in industrial settings and trac cabinets
supporting even the most power intensive devices such as IP cameras with
heaters and pan/tilt/zoom controls.
Innovative Power Control
In addition to functioning as a PoE power source, the ES7510-XT
includes advanced device controls, ensuring that power
consumption does not exceed parameters dened by the user. This
includes power budget control functions to limit power output on
devices not reporting correct consumption rates and device priority
options to guarantee power to critical devices while avoiding power
supply overloads.
Management and Security
The RocketLinx ES7510-XT is equipped with full Layer 2+ management
capabilities to provide the most exible network conguration and control.
Features like Link Aggregation Control Protocol allow grouping of multiple
ports to enhance bandwidth and provide load balancing while Port-Based
VLAN, QoS, IGMP Snooping, and Rate Control features enable optimum
control over the network environment. In addition to the full array of
management capabilities, the ES7510-XT also supports the most advanced
security features to protect the network and guarantee secure, reliable
data transmission. Fault relay and e-mail notication of event alarms, DHCP
supporting IP and MAC binding, IEEE 802.1X network access control, SSH,
and many other controls are included to make secure administration and
management a simple task.
RocketLinx™ ES7510-XT
Part Number: 32046-3
KEY FEATURES AND BENEFITS::
• Integrate IP cameras, access points and other PoE devices
• Eight 10/100BASE-TX PoE Plus ports and two Gigabit RJ45/SFP
combo ports featuring Digital Diagnostic Monitoring (DDM)
• PoE ports support both IEEE 802.3af (15.4W) and the latest high
power IEEE 802.3at standards (30W)
• Easy setup and administration via Netvision application, web
page or Cisco-like command line interfaces
• Advanced redundant ring support with 5ms recovery time, for
up to 4 x 100M rings plus two Gigabit uplink rings
• Advanced security features include Port Security, Access IP List,
HTTPS and SSH login
• SNMP and IEEE 802.1AB LLDP for network management
• Tag-VLAN supporting multiple VLAN trac isolation
• LACP port trunking for bandwidth aggregation to support
video surveillance
• Redundant DC power inputs and multiple event relay output
for advanced device alarm control
• Extended operating temperature -40° to 75°C
• NEMA TS2 certied
• RoHS2 compliant under CE
• IPv6 support
PRODUCT DESCRIPTION::
connect. communicate. control.
POE SWITCH
TS2
NEMA
EXTENDED
TEMPERATURE
RATINGS
PoE
POWER OVER
ETHERNET