Specifications

94

BeaconInterval(3): TheBeaconIntervalvalueindicatesthefrequency
intervalofthebeacon.Abeaconisapacket
broadcastbytheRoutertosynchronizethe
wirelessnetwork.Donotmodifydefaultvalueif
youdon’tknowwhatitis,defaultvalueis100.

DTIMPeriod(4): ConfigurestheDTIM(DeliveryTrafficIndication
Message)sendper
iod.Donotmodifythedefault
valueifyoudon’tknowwhatitis,defaultvalueis
3.

DataRate(5): Setthewirelessdatatransferratetoacertainvalue. 
Sincemostofwirelessdeviceswillnegotiatewith
eachotherandpickaproperdatatransferrate
automatically,it’snotnecessarytochangethis
valu
eunlessyouknowwhatwillhappenafter
modification.

NDataRate(6): Sameasabove,butonlyfor802.11nclients.

ChannelWidth(7):Setchannelwidthofwirelessradio.Donotmodify
thedefaultvalueifyoudon’tknowwhatitis,
defaultsettingis‘Auto20/40MHz’.40MHz
prov
idesbetternetworkspeedfor802.11nwireless
clients.However,ifthereare802.11b/gclients
connectingtothisWireless‐NRangeExtender,itwill
switchto20MHzmodeautomatically.