Specifications

91
2.7.1.6Setupprocedurefor‘UniversalRepeater’
Inthismode,theroutercanactasawirelessrepeater;itcanbea
StationandanAPatthesametime.ItcanusetheStationfunctionto
connecttoaRootAPandusetheAPfunctionto serviceallwireless
stationswithinitscoverage.
SelectUniversalRepeaterfromthe‘Mo
de’drop‐do wnmenu(1),andthe
followingwillbedisplayed:




Herearedescriptionsofeverysetupitem:
Band(2):Selectthebandyouwanttouse,allth ewireless
routersmustusethesamesetting.
SSID(3): Thisisthenameofthewirelessrouter.Youcantype
anyalphanumericalcharactershere,maximum32
characters.SSIDisusedtoidentifyyourown
wirelessrouterfromotherswhenthereareother
wirelessroutersinthesamearea.Defau
ltSSIDis
‘default’,it’srecommendedtochangedefaultSSID
valuetotheonewhichismeaningfultoyou,like
myhome,office_room1,etc.
1
2
3
4
5
7
6
NOTE: For Repeater Mode, this router will demodulate the received signal,
checking if this signal is noise for the operating network then have the
signal modulated and amplified again. The output power of this mode is the
same as that of WDS and normal AP mode.