Specifications

82
d.APBridge‐PointtoMulti‐Point:Connectthisrouterwithuptofour
otherwirelessrouters,toexpandthescopeofthenetwork.

e.APBridge‐WDS:ConnectthisrouterwithuptofourWDS‐capable
wirelessrouters,toexpandthescopeofthenetwork.

f.UniversalRepeater:Thero
utercanactasStationandanAPatthe
sametime.ItcanusetheStationfunctiontoconnect toaRootAPand
usetheAPfunctiontoserviceallwirelessstationswithinitscoverage.






Selecttheoperationmodeyouwanttousefromthe‘Mode’dr
op‐down
menu(1),andcontinueonotheroperationmodespecificsettings:

AP‐gotosection2‐7‐1‐1
Station‐Infrastructure   ‐gotosection2‐7‐1‐2
APBridge‐PointtoPoint  ‐gotosection2‐7‐1‐3
APBridge‐PointtoMulti‐Point‐gotosection2‐7‐1‐4
APBridge‐WDS
‐gotosection2‐7‐1‐5
UniversalRepeater   ‐gotosection2‐7‐1‐6
NOTE: For ‘AP Bridge-Point to Point’ and ‘AP Bridge-Point to Multi-Point’
mode, the wireless router operates in wireless bridge dedicated mode – the
wireless router is only used to expand the scope of the network, and no
wireless clients will be accepted. If you want to use your wireless router to
expand the scope of the network, and also accept wireless clients, please
select ‘AP Bridge-WDS’ or ‘Universal Repeater‘ mode.