Specifications

119
TrafficType(g):Selectthetraffictypeofthisrule,available
optionsareNone,SMTP,HTTP,POP3,andFTP.You
canselectaspecifictraffictypeforthisrule,ifyou
wanttomakethisruleasanIPaddressbasedrule
(applythelimitationonalltrafficsfrom/tothe
specif
iedIPaddress/portnumber),select‘None’.

Protocol(h):  Selecttheprotocoltypeofthisrule,available
optionsareTCPandUDP.Ifyoudon’tknowwhat
protocolyourapplicationuses,try‘TCP’first,and
switchto‘UDP’ifthisruledoesn’tseemtowork.

Afteryoucompleteallsettings,clickthe‘save’button(i),yo
u’llbe
broughtbacktopreviousmenu,andtheruleyoujustsetwillappearin
thecurrentQoStable;ifyoudidanythingwrong,you’llgetanerror
messagewhenyouclickthe‘Save’button,correctyourinputbythe
instructionsgivenbytheerrormessage.

Ifyouwanttoeraseallthevaluesyo
ujustinputted,clickthe‘Reset’
button.