User`s guide

6211-I1 ADSL2+ Router Command Line Interface User’s Guide

Introduction

This manual describes the Command Line Interface (CLI) available in the 6211-I1 ADSL2+ router.

The following commands are available from the 6211-I1 CLI:

• adsl

• arp

• atm

• brctl

• cat

• defaultgateway

• df

• dhcpserver

• dns

• dumpcfg

• help

• ifconfig

• lan

• logout

• passwd

• ping

• ppp

• ps

• pwd

• reboot

• remoteaccess

• restoredefault

• route

• save

• sntp

• swversion

• sysinfo

• tftp

• wan

The access the CLI:

1. Change the address of your PC or the address of the router so that both are in the same network

segment. The default address and subnet mask of the router are 192.168.1.1 and 255.255.255.0. See

the 6211-I1 ADSL2+ Router User’s Guide for more information.

2. Open a command window and use Telnet to connect to the router. For example:

telnet 192.168.1.1

3. If prompted for a user name and password, use admin for both. User name and password are case

sensitive.