User`s guide

6211-I1 ADSL2+ Router Command Line Interface User’s Guide
48
Options for the delete command:
wan delete <port.vpi.vci> [<connection Id>]
<port.vpi.vci>
port--port number of the VCC to add.
Valid values: 0.
vpi--VPI of the VCC to add.
Valid values: 0-255.
Default value: 0
vci--VCI of the VCC to add.
Valid values: 32-65535.
Default value: 35.
<connection Id>
The number that identifies the existing WAN connection. If the connection Id is omitted, then its value is 1.
Valid values: 1-8.
Default value: 1
Options for the show command:
wan show [<port.vpi.vci>]
<port.vpi.vci>
port--port number of the VCC to add.
Valid values: 0.
vpi--VPI of the VCC to add.
Valid values: 0-255.
Default value: 0
vci--VCI of the VCC to add.
Valid values: 32-65535.
Default value: 35
If <port.vpi.vci> is omitted, then it will display the summary state of all existing WAN interfaces.
• The configuration needs to first be saved to permanent storage, and then it becomes
effective after a reboot.
The wan show command shows the WAN interfaces after reboot (the second stage).
Options for the --help command:
wan -help [<bridge|pppoe|pppoa|mer|ipoa>]
<bridge|pppoe|pppoa|mer|ipoa>
Display only valid options for the specified protocol.
If <bridge|pppoe|pppoa|mer|ipoa> is omitted, then the help for all protocols is displayed.