User`s guide

6211-I1 ADSL2+ Router Command Line Interface User’s Guide
18
Examples
A simple initialization.
atm start
atm operate vcc --add 0.0.35 aal5 1 vcmux_bridged8023
A more complex initialization.
atm start --pqs 400 --bo 0
atm operate tdte --add ubr_pcr 15000
atm operate tdte --show
index ype pcr scr mbs
1 ubr 0 0 0
2 ubr_pcr 15000 0 0
atm operate vcc --add 0.0.35 aal5 2 vcmux_bridged8023
Display interface configuration (assumes that the ATM driver is started).
atm operate intf --show
port status type
0 enabled adsl
Create and display a VCC configuration (assumes that the ATM driver is started).
atm operate vcc --add 0.0.35 aal5 1 vcmux_bridged8023 --addq 0.0.35 64 2 --addq
0.0.35 80 1
atm operate vcc --add 0.0.36 aal5 1 vcmux_routed --addq 0.0.36 128 1
atm operate vcc --show
vcc status type tdte_index q_size q_priority encapsulation
0.0.35 enabled aal5 1 64 2 vcmux_bridged8023
80 1
0.0.36 enabled aal5 1 128 1 llcencaps
Display interface statistics (assumes that the ATM driver is started).
atm operate intf --stats
interface statistics for port 0
in octets 8130336
out octets 46512
in errors 0
in unknown 0
in hec errors 0
in invalid vpi vci errors 0
in port not enable errors 0
in pti errors 0
in circuit type errors 0
in oam rm crc errors 0
in gfc errors 0
aal5 interface statistics for port 0
in octets 8130336
out octets 46512
in ucast pkts 5426
out ucast pkts 189
in errors 0
out errors 0
in discards 0
out discards 0