User`s guide

6211-I1 ADSL2+ Router Command Line Interface User’s Guide
12
Examples
A simple initialization.
adsl start [--up]
or
adsl start
adsl connection --up
A more complex initialization.
adsl start --up --mod dl --lpair I
or
adsl start
adsl connection --up --mod dl --lpair I
Getting in and out of the test modes.
adsl connection --reverb
...
adsl connection --up
Selecting tones.
adsl connection --tones 0 32 0xFEFFFF7F 32 224 0xFEFFFFFFFFFFFF7F
Selects tones from 1 to 31 for upstream and from 33 to 95 for downstream.
Starting and monitoring the BERT.
adsl bert -start 60
To run the BERT for 60 seconds. After about 20 seconds of the BERT running, the results appear:
adsl bert -show
adsl: BERT results:
BERT Status = RUNNING
BERT Total Time = 60 sec
BERT Elapsed Time = 20 sec
BERT Bits Tested = 0x0000000008B4C700 bits
BERT Err Bits = 0x0000000000000067 bits
After 60 seconds when the BERT has completed, the results of the -show command appear:
adsl bert -show
adsl: BERT results:
BERT Status = NOT RUNNING
BERT Total Time = 60 sec
BERT Elapsed Time = 60 sec
BERT Bits Tested = 0x000000001A1E5500 bits
BERT Err Bits = 0x0000000000000067 bits
Display minimal ADSL state.
adsl info --state
adsl: ADSL driver and PHY status
Status: Showtime Channel: FAST, Upstream rate = 8064 Kbps, Downstream rate = 1024
Kbps