User manual

21
NOTE: NAT is enabled so the DHCP Server Relay option is hidden above.
(see underlined notes below
).
Consult the field descriptions below for more details.
LOCAL AREA NETWORK (LAN) SETUP
GroupName: You can ignore this checkbox.
IP Address: Enter the IP address for the LAN port.
Subnet Mask: Enter the subnet mask for the LAN port.
LOOPBACK IP AND SUBNETMASK
IP Address: Enter the IP address.
Subnet Mask: Enter the subnet mask.
Enable IGMP Snooping: Enable by ticking the checkbox ;.
Standard Mode
: In standard mode, multicast traffic will
flood to all bridge ports when no client subscribes to a
multicast group – even if IGMP snooping is enabled.
Blocking Mode
: In blocking mode, the multicast data
traffic will be blocked and not flood to all bridge ports when
there are no client subscriptions to any multicast group.