WAP-5813n Gigabit Wireless Router User Manual Version C1.
Preface This manual provides information related to the installation and operation of this device. The individual reading this manual is presumed to have a basic understanding of telecommunications terminology and concepts. If you find the product to be inoperable or malfunctioning, please contact technical support for immediate service by email at INT-support@comtrend.com For product update, new product release, manual revision, or software upgrades, please visit our website at http://www.comtrend.
Protect Our Environment This symbol indicates that when the equipment has reached the end of its useful life, it must be taken to a recycling centre and processed separate from domestic waste. The cardboard box, the plastic contained in the packaging, and the parts that make up this router can be recycled in accordance with regionally established regulations. Never dispose of this electronic equipment along with your household waste; you may be subject to penalties or sanctions under the law.
Table of Contents CHAPTER 1 INTRODUCTION...........................................................................................................5 1.1 FEATURES ........................................................................................................................................5 1.2 APPLICATION ...................................................................................................................................5 CHAPTER 2 INSTALLATION.........................................
CHAPTER 8 MANAGEMENT ..........................................................................................................58 8.1 SETTINGS .......................................................................................................................................58 8.1.1 Backup Settings...............................................................................................................58 8.1.2 Update Settings...........................................................................
Chapter 1 Introduction The WAP-5813n Gigabit Wireless Router provides wired and wireless access for high-bandwidth applications in the home or office. It is designed to connect to an ADSL or GPON (Gigabit-Capable Passive Optical Network) modem. It includes one 10/100/1000 Base-T Gigabit Ethernet WAN port and four 10/100/1000 Base-T Gigabit Ethernet LAN ports. It also has TR-068 compliant color panels and LED indicators, for easy installation and use. An integrated 802.
Chapter 2 Installation 2.1 Hardware Setup Follow the instructions below to complete the hardware setup. BACK PANEL The figure below shows the back panel of the device. Power Button Eth Wan Port Ethernet (LAN) Ports Power Port Reset Button Power ON Press the power button to the OFF position (OUT). Connect the power adapter to the power port. Attach the power adapter to a wall outlet or other AC source. Press the power button to the ON position (IN).
FRONT PANEL The Wi-Fi & WPS buttons are located on the bottom-left of the front panel, as shown. WI-FI BUTTON Press this button to enable/disable the wireless LAN (WLAN). WPS BUTTON Press this button to begin searching for WPS clients. These clients must also enable WPS push button mode. When WPS is available the WPS LED will be ON.
2.2 LED Indicators The front panel LED indicators are shown below and explained in the following table. This information can be used to check the status of the device and its connections. LED Color Mode On WLAN LAN 1X-4X WPS WAN Green Green Green Green Green Green POWER (logo) Red The wireless module is ready. (i.e. installed and enabled). Off The wireless module is not ready. (i.e. either not installed or disabled). Blink Data transmitting or receiving over WLAN.
Chapter 3 Web User Interface This section describes how to access the device via the web user interface (WUI) using an Internet browser such as Internet Explorer (version 5.0 and later). 3.1 Default Settings The factory default settings of this device are summarized below. • • • • LAN IP address: 192.168.1.1 LAN subnet mask: 255.255.255.
3.2 IP Configuration DHCP MODE When the WAP-5813n powers up, the onboard DHCP server will switch on. Basically, the DHCP server issues and reserves IP addresses for LAN devices, such as your PC. To obtain an IP address from the DCHP server, follow the steps provided below. NOTE: The following procedure assumes you are running Windows XP. However, the general steps involved are similar for most operating systems (OS). Check your OS support documentation for further details.
STATIC IP MODE In static IP mode, you assign IP settings to your PC manually. Follow these steps to configure your PC IP address to use subnet 192.168.1.x. NOTE: The following procedure assumes you are running Windows XP. However, the general steps involved are similar for most operating systems (OS). Check your OS support documentation for further details.
3.3 Login Procedure Perform the following steps to login to the web user interface. NOTE: The default settings can be found in section 3.1. STEP 1: Start the Internet browser and enter the default IP address for the device in the Web address field. For example, if the default IP address is 192.168.1.1, type http://192.168.1.1. NOTE: For local administration (i.e. LAN access), the PC running the browser must be attached to the Ethernet, and not necessarily to the device. For remote access (i.e.
STEP 3: After successfully logging in for the first time, you will reach this screen.
Chapter 4 Device Information The web user interface is divided into two windowpanes, the main menu (at left) and the display screen (on the right). The main menu has several options and selecting each of these options opens a submenu with more selections. NOTE: The menu items shown are based upon the configured connection(s) and user account privileges. For example, if NAT and Firewall are enabled, the main menu will display the NAT and Security submenus.
4.1 WAN Select WAN from the Device Info submenu to display the configured PVC(s). Heading Description Interface Name of the interface for WAN Description Name of the WAN connection Type Shows the connection type VlanMuxId Shows 802.1Q VLAN ID IGMP Shows Internet Group Management Protocol (IGMP) status NAT Shows Network Address Translation (NAT) status Firewall Shows the status of Firewall Status Lists the status of DSL link IPv4 Address Shows WAN IPv4 address 4.
4.2.1 LAN Statistics This screen shows data traffic statistics for each LAN interface. Heading Description Interface LAN interface(s) Received/Transmitted: 4.2.2 - Bytes Pkts Errs Drops Number Number Number Number of of of of Bytes Packets packets with errors dropped packets WAN Statistics This screen shows data traffic statistics for each WAN interface.
Heading Description Interface WAN interfaces Description WAN service label Received/Transmitted - Bytes - Pkts - Errs - Drops Number Number Number Number of of of of Bytes Packets packets with errors dropped packets 4.3 Route Choose Route to display the routes that the WAP-5813n has found.
4.4 ARP Click ARP to display the ARP information. Field IP address Flags HW Address Device Description Shows IP address of host pc Complete, Incomplete, Permanent, or Publish Shows the MAC address of host pc Shows the connection interface 4.5 DHCP Click DHCP to display all DHCP Leases.
Chapter 5 Advanced Setup This chapter explains the following screens: 5.1 ETH WAN INTERFACE 5.2 WAN 5.3 LAN 5.4 NAT 5.5 Security 5.6 Parental Control 5.7 Routing 5.8 DNS 5.9 UPnP 5.10 Interface Grouping 5.11 Certificate 5.1 ETH WAN INTERFACE This screen displays the Ethernet WAN Interface configuration.
5.2 WAN This screen allows for the configuration of WAN interfaces. Heading Description Interface Name of the interface for WAN Description Name of the WAN connection Type Shows the connection type Vlan8021p VLAN ID is used for VLAN Tagging (IEEE 802.1Q) VlanMuxId Shows 802.
NOTE: NAT is enabled so the DHCP Server Relay option is hidden above. (see underlined notes below). Consult the field descriptions below for more details. LOCAL AREA NETWORK (LAN) SETUP GroupName: You can ignore this checkbox. IP Address: Enter the IP address for the LAN port. Subnet Mask: Enter the subnet mask for the LAN port. LOOPBACK IP AND SUBNETMASK IP Address: Enter the IP address. Subnet Mask: Enter the subnet mask. Enable IGMP Snooping: Enable by ticking the checkbox ;.
Enable LAN side firewall: Enable by ticking the checkbox ;. DHCP Server: To enable DHCP, select Enable DHCP server and enter Start and End IP addresses and the Leased Time. This setting configures the router to automatically assign IP, default gateway and DNS server addresses to every PC on your LAN. Static IP Lease List: A maximum 32 entries can be configured. To add an entry, enter MAC address and Static IP and then click Save/Apply.
Enter appropriate information for each setting and then click Apply/Save. 2ND LAN INTERFACE To configure a secondary IP address, tick the checkbox ; outlined (in RED) below. IP Address: Enter the secondary IP address for the LAN port. Subnet Mask: Enter the secondary subnet mask for the LAN port. 5.4 NAT To display this option, NAT must be enabled in at least one PVC shown on the Advanced Setup - WAN screen. (NAT is not an available option in Bridge mode) 5.4.
To add a Virtual Server, click Add. The following will be displayed. Consult the table below for field and header descriptions. Field/Header Description Use Interface Select the WAN interface from the drop-down box. Select a Service Or Custom Server User should select the service from the list. Or User can enter the name of their choice. Server IP Address Enter the IP address for the server. External Port Start Enter the starting external port number (when you select Custom Server).
Field/Header Description External Port End Enter the ending external port number (when you select Custom Server). When a service is selected, the port ranges are automatically configured. Protocol TCP, TCP/UDP, or UDP. Internal Port Start Enter the internal port starting number (when you select Custom Server). When a service is selected the port ranges are automatically configured Internal Port End Enter the internal port ending number (when you select Custom Server).
Consult the table below for field and header descriptions. Field/Header Description Use Interface Select the WAN interface from the drop-down box. Select an Application Or Custom Application User should select the application from the list. Or User can enter the name of their choice. Trigger Port Start Enter the starting trigger port number (when you select custom application). When an application is selected, the port ranges are automatically configured.
To Activate the DMZ host, enter the DMZ host IP address and click Save/Apply. To Deactivate the DMZ host, clear the IP address field and click Save/Apply. 5.5 Security To display this function, you must enable the firewall feature in WAN Setup. For detailed descriptions, with examples, please consult Appendix A – Firewall. 5.5.1 IP Filtering This screen sets filter rules that limit IP traffic (Outgoing/Incoming). Multiple filter rules can be set and each applies at least one limiting condition.
On the following screen, enter your filter criteria and then click Apply/Save. Consult the table below for field descriptions. Field Description Filter Name The filter rule label Protocol TCP, TCP/UDP, UDP, or ICMP. Source IP address Enter source IP address. Source Subnet Mask Enter source subnet mask. Source Port (port or port:port) Enter source port number or range. Destination IP address Enter destination IP address. Destination Subnet Mask Enter destination subnet mask.
To add a filter (to allow incoming IP traffic), click the Add button. On the following screen, enter your filter criteria and then click Apply/Save. Consult the table below for field descriptions.
Field Description Filter Name The filter rule label Protocol TCP, TCP/UDP, UDP, or ICMP. Policy Allow or Deny IP traffic Source IP address Enter source IP address. Source Subnet Mask Enter source subnet mask. Source Port (port or port:port) Enter source port number or range. Destination IP address Enter destination IP address. Destination Subnet Mask Enter destination subnet mask. Destination Port (port or port:port) Enter destination port number or range.
them must be met. Click Save/Apply to save and activate the filter rule. Consult the table below for detailed field descriptions. Field Description Protocol Type PPPoE, IPv4, IPv6, AppleTalk, IPX, NetBEUI, IGMP Destination MAC Address Defines the destination MAC address Source MAC Address Defines the source MAC address Source/Destination Interfaces Applies the filter to selected WAN interfaces. 5.6 Parental Control This selection provides WAN access control functionality. 5.6.
Click Add to display the following screen. See below for field descriptions. Click Save/Apply to add a time restriction. User Name: A user-defined label for this restriction. Browser's MAC Address: MAC address of the PC running the browser. Other MAC Address: MAC address of another LAN device. Days of the Week: The days the restrictions apply. Start Blocking Time: The time the restrictions start. End Blocking Time: The time the restrictions end. 5.6.
Enter the URL address and port number then click Save/Apply to add the entry to the URL filter. URL Addresses begin with “www”, as shown in this example. A maximum of 100 entries can be added to the URL Filter list. Tick the Exclude radio button to deny access to the websites listed. Tick the Include radio button to restrict access to only those listed websites. 5.7 Routing This option allows for Default Gateway, Static Route, and RIP configuration.
NOTE: After enabling the Automatic Assigned Default Gateway, the device must be rebooted to activate the assigned default gateway. 5.7.2 Static Route This option allows for the configuration of static routes. Click Add to create a new static route. Click Remove to delete the selected static route. Click the Add button to display the following screen.
Enter Destination Network Address, Subnet Mask, Gateway IP Address, and/or WAN Interface. Then click Apply/Save to add the entry to the routing table. 5.7.3 RIP To activate RIP, configure the RIP version/operation mode and select the Enabled checkbox ; for at least one WAN interface before clicking Save/Apply. 5.8 DNS 5.8.1 DNS Server To obtain DNS information from a WAN interface, select the first radio button and then choose a WAN interface from the drop-down box.
NOTE: You must reboot the router to make the new configuration effective. 5.8.2 Dynamic DNS The Dynamic DNS service allows you to map a dynamic IP address to a static hostname in any of many domains, allowing the WAP-5813n to be more easily accessed from various locations on the Internet. To add a dynamic DNS service, click Add. 36 The following screen will display.
Consult the table below for field descriptions.
5.9 UPnP Select the checkbox ; provided and click Apply/Save to enable UPnP protocol. 5.10 Interface Grouping Interface Grouping supports multiple ports to PVC and bridging groups. Each group performs as an independent network. To use this feature, you must create mapping groups with appropriate LAN and WAN interfaces using the Add button. The Remove button removes mapping groups, returning the ungrouped interfaces to the Default group. Only the default group has an IP interface.
Automatically Add Clients With the Following DHCP Vendor IDs: Add support to automatically map LAN interfaces to PVC's using DHCP vendor ID (option 60). The local DHCP server will decline and send the requests to a remote DHCP server by mapping the appropriate LAN interface. This will be turned on when Interface Grouping is enabled. For example, imagine there are 4 PVCs (0/33, 0/36, 0/37, 0/38). VPI/VCI=0/33 is for PPPoE and the others are for IP set-top box (video).
5.11 Certificate A certificate is a public key, attached with its owner’s information (company name, server name, personal real name, contact e-mail, postal address, etc) and digital signatures. There will be one or more digital signatures attached to the certificate, indicating that these entities have verified that this certificate is valid. 5.11.1 Local CREATE CERTIFICATE REQUEST Click Create Certificate Request to generate a certificate-signing request.
The following table is provided for your reference. Field Description Certificate Name A user-defined name for the certificate. Common Name Usually, the fully qualified domain name for the machine. Organization Name The exact legal name of your organization. Do not abbreviate. State/Province Name The state or province where your organization is located. It cannot be abbreviated. Country/Region Name The two-letter ISO abbreviation for your country.
5.11.2 Trusted CA CA is an abbreviation for Certificate Authority, which is a part of the X.509 system. It is itself a certificate, attached with the owner information of this certificate authority; but its purpose is not encryption/decryption. Its purpose is to sign and issue certificates, in order to prove that these certificates are valid. Click Import Certificate to paste the certificate content of your trusted CA.
Chapter 6 Wireless The Wireless menu provides access to the wireless options discussed below. 6.1 Basic The Basic option allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements. Click Save/Apply to apply the selected wireless options. Consult the table below for descriptions of these options.
Option Description Clients Isolation When enabled, it prevents client PCs from seeing one another in My Network Places or Network Neighborhood. Also, prevents one wireless client communicating with another wireless client. Disable WMM Advertise Stops the router from ‘advertising’ its Wireless Multimedia (WMM) functionality, which provides basic quality of service for time-sensitive applications (e.g. VoIP, Video). SSID Sets the wireless network name. SSID stands for Service Set Identifier.
Click Save/Apply to implement new configuration settings. WIRELESS SECURITY Wireless security settings can be configured according to Wi-Fi Protected Setup (WPS) or Manual Setup. The WPS method configures security settings automatically (see section 6.2.1) while the Manual Setup method requires that the user configure these settings using the Web User Interface (see the table below). Select SSID Select the wireless network name from the drop-down box. SSID stands for Service Set Identifier.
The settings for WPA authentication are shown below. The settings for WPA-PSK authentication are shown next. WEP Encryption This option specifies whether data sent over the network is encrypted. The same network key is used for data encryption and network authentication. Four network keys can be defined although only one can be used at any one time. Use the Current Network Key list box to select the appropriate network key.
secret shared encryption keys are generated and used by the source station and the destination station to alter frame bits, thus avoiding disclosure to eavesdroppers. Under shared key authentication, each wireless station is assumed to have received a secret shared key over a secure channel that is independent from the 802.11 wireless network communications channel. Encryption Strength This drop-down list box will display when WEP Encryption is enabled.
NOTES: Your client may or may not have the ability to provide security settings to the WAP-5813n. If it does not, then you must set the WSC AP mode to Configured. Consult the device documentation to check its capabilities. In addition, using Windows Vista, you can add an external registrar using the StartAddER button (Appendix E has detailed instructions). II.
method. The WPS button on the rear panel of the router can be used for this purpose or the Web User Interface (WUI) can be used exclusively. The WPS push-button configuration is described in the procedure below. It is assumed that the Wireless function is Enabled and that the router is configured as the Wireless Access Point (AP) of your WLAN. In addition, the wireless client must also be configured correctly and turned on, with WPS function enabled.
NOTE: Unlike the push-button method, the pin method has no set time limit. This means that the router will continue searching until it finds a client. Step 6: Select the PIN radio button in the WSC Setup section of the Wireless Security screen, as shown in A or B below, and then click the appropriate button based on the WSC AP mode selected in step 2. A - For Configured mode, enter the client PIN in the box provided and then click the Add Enrollee button (see below).
6.3 MAC Filter This option allows access to the router to be restricted based upon MAC addresses. To add a MAC Address filter, click the Add button shown below. To delete a filter, select it from the MAC Address table below and click the Remove button. Option Select SSID Description Select the wireless network name from the drop-down box. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN.
6.4 Wireless Bridge This screen allows for the configuration of wireless bridge features of the WLAN interface. See the table beneath for detailed explanations of the various options. Click Save/Apply to implement new configuration settings. Feature Description AP Mode Selecting Wireless Bridge (aka Wireless Distribution System) disables Access Point (AP) functionality, while selecting Access Point enables AP functionality.
Feature Description Bridge Restrict Selecting Disabled disables wireless bridge restriction, which means that any wireless bridge will be granted access. Selecting Enabled or Enabled (Scan) enables wireless bridge restriction. Only those bridges selected in the Remote Bridges list will be granted access. Click Refresh to update the station list when Bridge Restrict is enabled. 6.5 Advanced The Advanced screen allows you to configure advanced features of the wireless LAN interface.
Field Description Auto Channel Timer (min) Auto channel scan timer in minutes (0 to disable) 802.11n/EWC An equipment interoperability standard setting based on IEEE 802.11n Draft 2.0 and Enhanced Wireless Consortium (EWC) Bandwidth Select 20GHz or 40GHz bandwidth. 40GHz bandwidth uses two adjacent 20GHz bands for increased data throughput. Control Sideband Select Upper or Lower sideband when in 40GHz mode. 802.11n Rate Set the physical transmission rate (PHY). 802.
Field Description Beacon Interval The amount of time between beacon transmissions in milliseconds. The default is 100 ms and the acceptable range is 1 – 65535. The beacon transmissions identify the presence of an access point. By default, network devices passively scan all RF channels listening for beacons coming from access points.
Heading Description MAC Lists the MAC address of all the stations. Associated Lists all the stations that are associated with the Access Point, along with the amount of time since packets were transferred to and from each station. If a station is idle for too long, it is removed from this list. Authorized Lists those devices with authorized access. SSID Lists which SSID of the modem that the stations connect to. Interface Lists which interface of the modem that the stations connect to.
Chapter 7 Diagnostics Diagnostics screens for IPoW and PPPoE connection types are shown below. IPoW Connection PPPoE Connection The Diagnostics menu provides feedback on the connection status of the WAP-5813n. If a test displays a fail status, click the Test button to retest and confirm the error. If the test continues to fail, click Help and follow the troubleshooting procedures provided.
Chapter 8 Management The Management menu has the following maintenance functions and processes: 8.1 Settings 8.2 System Log 8.3 TR-069 Client 8.4 Internet Time 8.5 Access Control 8.6 Update Software 8.7 Save and Reboot 8.1 Settings This includes Backup Settings, Update Settings, and Restore Default screens. 8.1.1 Backup Settings To save the current configuration to a file on your PC, click Backup Settings. You will be prompted for a location of the backup file.
8.1.3 Restore Default Click Restore Default Settings to restore factory default settings. After Restore Default Settings is clicked, the following screen appears. Close the browser and wait for 2 minutes before reopening it. It may also be necessary, to reconfigure your PC IP configuration to match your new settings. NOTE: This entry has the same effect as the Reset button. The WAP-5813n board hardware and the boot loader support the reset to default.
8.2 System Log This function allows a system log to be kept and viewed upon request. Follow the steps below to configure, enable, and view the system log. STEP 1: Click Configure System Log, as shown below (circled in Red). STEP 2: Select desired options and click Apply/Save. Consult the table below for detailed descriptions of each system log option. Option Description Log Indicates whether the system is currently recording events. The user can enable or disable event logging.
Option Description Log Level Allows you to configure the event level and filter out unwanted events below this level. The events ranging from the highest critical level “Emergency” down to this configured level will be recorded to the log buffer on the WAP-5813n SDRAM. When the log buffer is full, the newer event will wrap up to the top of the log buffer and overwrite the old event. By default, the log level is “Debugging”, which is the lowest critical level.
Option Description Inform Disable/Enable TR-069 client on the CPE. Inform Interval The duration in seconds of the interval for which the CPE MUST attempt to connect with the ACS and call the Inform method. ACS URL URL for the CPE to connect to the ACS using the CPE WAN Management Protocol. This parameter MUST be in the form of a valid HTTP or HTTPS URL. An HTTPS URL indicates that the ACS supports SSL.
The Get RPC Methods button forces the CPE to establish an immediate connection to the ACS. This may be used to discover the set of methods supported by the ACS or CPE. This list may include both standard TR-069 methods (those defined in this specification or a subsequent version) and vendor-specific methods. The receiver of the response MUST ignore any unrecognized methods. 8.4 Internet Time This option automatically synchronizes the router time with Internet timeservers.
NOTE: Passwords must be 16 characters or less. 8.6 Update Software This option allows for firmware upgrades from a locally stored file. STEP 1: Obtain an updated software image file from your ISP. STEP 2: Enter the path and filename of the firmware image file in the Software File Name field or click the Browse button to locate the image file. STEP 3: Click the Update Software button once to upload and install the file. NOTE: The update process will take about 2 minutes to complete.
8.7 Save and Reboot To save the current configuration and reboot the router, click Save/Reboot. NOTE: You may need to close the browser window and wait for 2 minutes before reopening it. It may also be necessary, to reset your PC IP configuration.
Appendix A – Firewall STATEFUL PACKET INSPECTION Refers to an architecture, where the firewall keeps track of packets on each connection traversing all its interfaces and makes sure they are valid. This is in contrast to static packet filtering which only examines a packet based on the information in the packet header. DENIAL OF SERVICE ATTACK Is an incident in which a user or organization is deprived of the services of a resource they would normally expect to have.
Example 1: Filter Name Protocol Policy Source IP Address Source Subnet Mask Source Port Dest. IP Address Dest. Subnet Mask Dest. Port Selected WAN interface : : : : : : : : : : In_Filter1 TCP Allow 210.168.219.45 255.255.0.0 80 NA NA NA br0 This filter will ACCEPT all TCP packets coming from WAN interface “br0” with IP Address/Subnet Mask 210.168.219.45/16 with a source port of 80, irrespective of the destination. All other incoming packets on this interface are DROPPED.
DAYTIME PARENTAL CONTROL This feature restricts access of a selected LAN device to an outside Network through the WAP-5813n, as per chosen days of the week and the chosen times. Example: User Name : Browser's MAC Address : Days of the Week : Start Blocking Time : End Blocking Time : FilterJohn 00:25:46:78:63:21 Mon, Wed, Fri 14:00 18:00 With this rule, a LAN device with MAC Address of 00:25:46:78:63:21 will have no access to the WAN on Mondays, Wednesdays, and Fridays, from 2pm to 6pm.
Appendix B – Pin Assignments ETHERNET Ports (RJ45) Pin Definition Pin Definition 1 Transmit data+ 5 NC 2 Transmit data- 6 Receive data- 3 Receive data+ 7 NC 4 NC 8 NC 69
Appendix C – Specifications Hardware Interface RJ-45 X 1 for WAN (Giga Ethernet), RJ-45 X 4 for LAN (Giga Ethernet), WPS Button X 1, Power Switch X 1, Wi-Fi On/Off Button X 1, Reset Button X 1 LAN Interface Standard..................... IEEE 802.3, IEEE 802.3u 10/100 BaseT .............. Auto-sense MDI/MDX support......... Yes WLAN Interface Standard ................... IEEE802.11n (IEEE802.11b/g compatible) Encryption................... 64/128-bit Wired Equivalent Privacy (WEP) Channels....................
Kit Weight (1*WAP-5813n, 1*RJ45 cable, 1*power adapter, 1*CD-ROM) = 1.0 kg Certifications ..........................................................................
Appendix D – SSH Client Unlike Microsoft Windows, Linux OS has a ssh client included. For Windows users, there is a public domain one called “putty” that can be downloaded from here: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html To access the ssh client you must first enable SSH access for the LAN or WAN from the Management Æ Access Control Æ Services menu in the web user interface. To access the router using the Linux ssh client For LAN access, type: ssh -l root 192.168.1.
Appendix E – WSC External Registrar Follow these steps to add an external registrar using the web user interface (WUI) on a personal computer running the Windows Vista operating system: Step 1: Enable UPnP on the Advanced Setup Æ LAN screen in the WUI. NOTE: A PVC must exist to see this option. Step 2: Open the Network folder and look for the BroadcomAP icon.
Step 3: On the Wireless Æ Security screen, enable WSC by selecting Enabled from the drop down list box and set the WSC AP Mode to Unconfigured. Step 3 Step 4 Step 4: Click the Save/Apply button at the bottom of the screen. The screen will go blank while the router applies the new Wireless settings. When the screen returns, press the Start AddER button, as shown above.
Step 5: Now return to the Network folder and click the BroadcomAP icon. A dialog box will appear asking for the Device PIN number. Enter the Device PIN as shown on the Wireless Æ Security screen. Click Next. Step 6: Windows Vista will attempt to configure the wireless security settings. Step 7: If successful, the security settings will match those in Windows Vista.
