User manual

73
Field
Description
Enable/Disable It enables the tunnel interface. If disables the tunnel
interface won’t appear as an available interface.
Activate/Deactivate Enable/Disables the packet transmission through the
tunnel.
Associated WAN Interface
The WAN interface that would sustain the tunnel.
Mechanism The mechanism that is using the tunnel. It can be
LINK_GRE (layer 2) or IP_GRE (routed)
GRE Tunnel Description
A string that helps to describe the tunnel.
Tunnel Name
A name for the tunnel.
Tunnel peer end point The IP address of the tunnel end-point. This only
applies when the mechanism used is IP_GRE (Routed)
Tunnel IP
Force a source IP used for the tunnel.
Remote subnet
The subnet of the remote peer end point. This only
applies when the mechanism used is IP_GRE (Routed)
Associated WAN Interface Only for IP GRE, the WAN interface where the source
IP must be used.
Associated LAN Interface Only for LINK GRE, the LAN interface (bridge) that
would use the tunnel to forward the packets.
802.1Q The VLAN TAG used for the tunnel (value of -1 means
no VLAN tag is used).
802.1P
The priority (P-bit) marked on the VLAN.