User manual

118
Option
Description
ACS Password Password used to authenticate the CPE when making a
connection to the ACS using the CPE WAN Management
Protocol. This password is used only for HTTP-based
authentication of the CPE.
WAN Interface
used by TR-069
client
Choose Any_WAN, LAN, Loopback or a configured connection.
Display SOAP
messages on
serial console
Enable/Disable SOAP messages on serial console. This option is
used for advanced troubleshooting of the device.
Connection Request
Authorization
Tick the checkbox

to enable.
User Name
Username used to authenticate an ACS making a Connection
Request to the CPE.
Password
Password used to authenticate an ACS making a Connection
Request to the CPE.
URL
Universal Resource Locator.
The Get RPC Methods button forces the CPE to establish an immediate connection
to the ACS. This may be used to discover the set of methods supported by the ACS
or CPE. This list may include both standard TR-069 methods (those defined in this
specification or a subsequent version) and vendor-specific methods. The receiver of
the response MUST ignore any unrecognized methods.