User manual

114
Close the browser and wait for 2 minutes before reopening it. It may also be
necessary, to reconfigure your PC IP configuration to match any new settings.
NOTE: This entry has the same effect as the Reset button. The VG-8050 board
hardware and the boot loader support the reset to default. If the Reset
button is continuously pressed for 5 seconds, the boot loader will erase
the configuration data saved in flash memory.
10.2 System Log
This function allows a system log to be kept and viewed upon request.
Follow the steps below to configure, enable, and view the system log.
STEP 1: Click Configure System Log, as shown below (circled in Red).
STEP 2: Select desired options and click Apply/Save.