User manual

76
The Slave DSL settings screen is shown below.
This table describes the DSL settings.
Option Description
G.dmt Enabled Sets G.Dmt if you want the system to use G.Dmt mode.
G.Lite Enabled Sets G.Lite if you want the system to use G.Lite mode.
T1.413 Enabled Sets the T1.413 if you want the system to use only T1.413
mode.
ADSL2 Enabled The device can support the functions of the ADSL2.
AnnexL Enabled The device can support/enhance the long loop test.
ADSL2+ Enabled The device can support the functions of the ADSL2+.
AnnexM Enabled Covers a hi
g
her “upstream” data rate version, by makin
g
use of
some of the downstream channels.
Inner Pair Reserved only
Outer Pair Reserved only
Bitswap Enable Allows bitswapping function
SRA Enable Allows seamless rate adaptation