User manual

55
6.2 LAN
Configure the ADSL Router IP Address and Subnet Mask for LAN interface. Save
button only saves the LAN configuration data. Save/Reboot button saves the LAN
configuration data and reboots the device to make the new configuration effective.
(Slave) IP Address: Enter the IP address for the LAN port.
(Slave) Subnet Mask: Enter the subnet mask for the LAN port.
Enable IGMP Snooping: Enable /Disable the function that is IGMP Snooping.
Standard Mode: In standard mode, as in all prior releases, multicast traffic will
flood to all bridge ports when there is no client subscribes to any multicast group –
even when IGMP snooping is enabled.
Blocking Mode: In blocking mode, the multicast data traffic will be blocked and not
flood to all bridge ports when there are no client subscriptions to any multicast
group.
To configure a secondary IP address for the LAN port, click the box as shown below.