User manual

30
STEP 7: Click Next to continue. To enable the wireless function, select the radio
button (as shown), input a new SSID (if desired) and click Next.
STEP 8: Click Next to display the WAN Setup-Summary screen that presents the
entire configuration summary. Click Save/Reboot if the settings are
correct. Click Back if you wish to modify the settings.
STEP 9: After clicking Save/Reboot, the router will save the configuration to
flash memory and reboot. After the device reboots, the Web UI will
refresh to the Device Info screen. The router is ready for operation when
the LED indicators display correctly, as described in section 1.3.