User manual

20
3.3 Default Settings
During power on initialization, the router sets all configuration attributes to default
values. It will then read the configuration profile from flash memory. The default
attributes are overwritten when identical attributes with different values are
configured. The configuration profile can be created via the web browser, telnet
user interface or other management protocols. The factory default configuration
can be restored either by resetting the device or selecting the Restore Default option
in Management Æ Settings (see section 9.1.3 Restore Default).
The following list shows the factory default settings for this router.
• LAN port IP address(es): 192.168.1.1 (ADSL1) and 192.168.1.2 (ADSL2)
• Local administrator account name: root
• Local administrator account password: 12345
• Local non-administrator account name: user
• Local non-administrator account password: user
• Remote WAN access: disabled
• Remote WAN access account name: support
• Remote WAN access account password: support
• NAT and firewall: Disabled for MER, IPoA and Bridge modes
Enabled for PPPoE and PPPoA modes
• DHCP server on LAN interface: enabled
• WAN IP address: none
• Wireless access: enabled
• SSID: Comtrend
• Wireless authentication: open (no authentication)
• Annex M enabled (all other modes disabled)