User manual

106
Display
Level
Allows the user to select the logged events and displays on the View
System Log page for events of this level and above to the highest
Emergency level.
Mode Allows you to specify whether events should be stored in the local
memory, or be sent to a remote syslog server or both simultaneously.
If remote mode is selected, view system lo
g
will not be able to display
events saved in the remote syslo
g
server. When either Remote mode
or Both mode is configured, the WEB UI will prompt the user to enter
the Server IP address and Server UDP port.
Step 3: Click View System Log. The results are displayed in a new browser
window. An example is shown below.
9.3 SNMP Agent
Simple Network Management Protocol (SNMP) allows a management application to
retrieve statistics and status from the SNMP agent in this device. Select desired
values and click Save/Apply to configure SNMP options.