User manual

103
9.1.3 Restore Default
Click the Restore Default Settings button to restore the device to its original
factory installed settings (see section 3.3 Default Settings).
NOTE 1: This entry has the same effect as the hardware reset-to-default button.
The device board hardware and the boot loader support the reset to
default button. If the reset button is continuously pushed for more than
5 seconds, the boot loader will erase the entire configuration data saved
on the flash memory.
NOTE 2: Restoring system settings requires a system reboot. This necessitates
that the current Web UI session be closed and restarted. Before
restarting the connected PC must be configured with a static IP address in
the 192.168.1.x subnet in order to configure the device.