User`s manual

Chapter 8 Diagnostics
The Diagnostics menu provides feedback on the connection status of the CT-536+
and the ADSL link. The individual tests are listed below. If a test displays a fail
status, click Rerun Diagnostic Tests at the bottom of this page to make sure the
fail status is consistent. If the test continues to fail, click Help and follow the
troubleshooting procedures.
This is the default screen for the device.
Test Description
Ethernet Connection Pass: indicates that the Ethernet interface from your
computer is connected to the LAN port of your DSL Router. A
flashing or solid green LAN LED on the router also signifies
that an Ethernet connection is present and that this test is
successful.
Fail: Indicates that the DSL Router does not detect the
Ethernet interface on your computer.
USB connection Pass: Indicates that the USB interface from your computer is
connected to the LAN port of your DSL router.
Down: Indicates that the DSL Router does not detect the
USB interface on your computer.
Wireless connection Pass: Indicates that the Wireless interface from your
computer is connected to the wireless network.
83