User`s manual

For this example, assume that the device needs to convert the following 11 digit

dial sequence “123-xxx-xxxxx” into “002-xxx-xxxxx”, where “x” is any number.

Here are the steps involved.

Step 1: Enter any number between 0 and 32767 in the Priority field.

Step 2: In the prefix field enter “123”.

Step 3: Enter “3” in the Mindigit field to limit the prefix minimum to 3 digits.

Step 4: Enter “11” or greater as the MaxDigit value to accept all 11 digits of

the dial sequence.

Step 5: In the DeleteDigit field, enter “3” to delete the “123” prefix

Step 6: Enter “002” in the InsertDigit field to add “002” as the prefix.

Step 7: Click the Apply button to return to the Advance configuration screen.

Step 8: Click Apply/Save to apply this rule to all outgoing calls.

NOTE: This prefix swap example is especially helpful for corporate

environments where the device is dialing through a PBX system.

The Dial Plan function is designed for maximum flexibility for your particular

environment. If you have a question contact your ISP for detailed instructions.