User`s manual

IPoE – Internet Protocol over Ethernet

STEP 7: The WAN IP Settings screen below allows for configuration of the

connection in DHCP (automatic) or Static IP (manual) modes.

Enter information provided to you by your ISP to configure the WAN IP settings.

DHCP mode must be enabled when Obtain an IP address automatically is

chosen. Changing the default gateway or the DNS affects the whole system.

Where Static mode is selected, the IP address and subnet mask must be entered,

however, the Use WAN interface field does not need to be selected.

STEP 8: The next screen combines NAT, IGMP and WAN service selection

options.