User`s manual
10
STEP 2: Select Internet Protocol (TCP/IP) and click the Properties
button. The screen should now display as below. Change the IP
address to the domain of 192.168.1.x/24 (i.e. subnet
mask=255.255.255.0).
STEP 3: Click OK to submit the settings.
3.3 Login Procedure
Perform the following steps to login to the web user interface.
NOTE: The default settings for this device can be found in 3.1 Default
Settings.
STEP 1: Start the Internet browser and enter the default IP address for the
device in the Web address field. For example, if the IP address is
192.168.1.1, type http://192.168.1.1.
NOTE: For local administration (i.e. LAN access), the PC running the browser
must be attached to the Ethernet, and not necessarily to the device.
For remote access (i.e. WAN), use the remote username and
password.