User`s manual

3.2 TCP/IP Settings

DHCP Mode

When the device powers up, the DHCP server (on the device) will start

automatically. To set your PC for DHCP mode, check the Internet Protocol

properties of your Local Area Connection. You can set your PC to DHCP mode by

selecting Obtain an IP address automatically in the dialog box shown below.

STATIC IP Mode

To configure the device manually, your PC must have a static IP address within

the 192.168.1.x subnet. Follow the steps below to configure your PC IP address

to use subnet 192.168.1.x. The following assumes you are running Windows XP.

STEP 1: From the Network Connections window, open the Local Area Connection.

(You may also access this screen by double-clicking the Local Area

Connection icon on your taskbar.) Click the Properties button.