User manual

51
Field
Description
Traffic Class Name
Enter a name for the traffic class.
Rule Order
Last or null are the only options.
Rule Status
Disable or enable the rule.
Assign Classification
Queue
The queue configurations are presented in this format:
“Interfacename&Prece P&Queue Q” where P and Q are the
Precedence and Queue Key values for the corresponding
Interface as listed on the Queue Config screen.
Assign Differentiated
Services Code Point
(DSCP) Mark
The selected Code Point gives the corresponding priority to
the packets that satisfies the rules set below.
Mark 802.1p if
802.1q is enabled
Select between 0-7. The lower the digit shows the higher
the priority.