User manual

50
Queue Configuration Status: Enable/Disable the Queue entry.
Queue: Assign the entry to a specific network interface (QoS must be enabled).
Queue Precedence: Configure precedence for the Queue entry. Lower integer
values for precedence imply higher priority for this entry relative to others.
6.6.3 QoS Classification
The network traffic classes are listed in the following table.
Click Add to configure a network traffic class rule and Save/Apply to activate it.
This screen creates a traffic class rule to classify the upstream traffic, assign
queuing priority and optionally overwrite the IP header TOS byte. A rule consists of
a class name and at least one condition from either SET-1 or SET-2. All the
conditions specified in the rule must be satisfied for it to take effect.