User manual

37
Heading
Description
Interface
Name of the interface for WAN
Protocol
Shows the connection type
Igmp
Shows Internet Group Management Protocol (IGMP) status
Nat
Shows Network Address Translation (NAT) status
Firewall
Shows the status of Firewall
QoS
Shows Quality of Service (QoS) status
State
Shows the connection state of the WAN connection
Remove
Used to select connections for removal
Edit
Used to edit connections
6.2 LAN
From this screen, LAN interface settings can be configured.
NOTE: NAT is enabled so the Enable UPnP checkbox  is shown above while the
DHCP Server Relay option is hidden (see underlined notes below).
Consult the field descriptions below for more details.
IP Address: Enter the IP address for the LAN port.
Subnet Mask: Enter the subnet mask for the LAN port.
Enable UPnP: Tick the box to enable Universal Plug and Play.
This option is hidden when NAT disabled or if no PVC exists