User manual

STEP 5: The Device Setup screen is used to configure LAN interface settings.

Enter an IP Address and Subnet Mask for the CT-5072T LAN interface.

STEP 6: Click Next to display the configuration summary. Click Save/Reboot if

the settings are correct or click Back to modify these settings.

After clicking Save/Reboot, the router will save the configuration and reboot.

NOTES: To access the web user interface (WUI) after reboot, your PC IP settings

will need to be assigned using the STATIC IP method (see section 3.2),

since the on-board DHCP server is not active in bridge mode.

Similarly, the CT-5072T cannot be accessed from the WAN, for remote

management or technical support, since no WAN IP address is available.