User manual

20
Select Enable DHCP Server Relay (if required), and enter the DHCP Server IP
Address. This allows the CT-5072T to relay the DHCP packets to the remote DHCP
server. The remote DHCP server will provide the IP address.
NOTE: Enable DHCP Server Relay will not display if NAT is enabled.
To configure a secondary IP address on the LAN, click the checkbox  shown.
STEP 7: Click Next to display the configuration summary. Click Save/Reboot if
the settings are correct or click Back to modify these settings.
After clicking Save/Reboot, the CT-5072T will save the configuration and reboot.
4.2.3 IP Over ATM
STEP 4: Enter the WAN IP settings provided by your ISP. Click Next to continue.