User manual

15
USE STATIC IP ADDRESS
Unless your service provider specially requires it, do not select this checkbox . If
selected, enter the static IP address in the IP Address field. Also, don’t forget to
adjust the IP configuration to Static IP Mode as described in section 3.2.
RETRY PPP PASSWORD ON AUTHENTICATION ERROR
Tick the checkbox  to enable this function.
ENABLE PPP DEBUG MODE
When this option is selected, the system will put more PPP connection information
into the system log. This is for debugging errors and not for normal usage.
Bridge PPPoE Frames Between WAN and Local Ports
When Enabled, this creates local PPPoE connections to the WAN side. Enable this
option only if all LAN-side devices are running PPPoE clients, otherwise disable it.
The CT-5072T supports pass-through PPPoE sessions from the LAN side while
simultaneously running a PPPoE client from non-PPPoE LAN devices.
FIXED MTU
This option allows for changes to the MTU size of PPPoE and PPPoA WAN interfaces.
The default values for MTU size are 1492 for PPPoE and 1500 for PPPoA. The
allowable range of values for MTU size is from 64 to 1500. If a value is entered
outside this range the following dialog box will be displayed.
STEP 5: This screen provides access to IGMP Multicast and WAN Service settings.
Enable each service by selecting its checkbox . Click Next to continue.