User manual

12
4.2 Manual Quick Setup
To setup the WAN connection manually, follow these instructions:
STEP 1: Un-tick the DSL Auto-connect checkbox  on the Quick Setup screen.
STEP 2: Adjust the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI)
settings for the connection you wish to establish. You can also Enable
Quality of Service (QoS) with its checkbox .
Click Next to continue.
STEP 3: On the next screen, you can choose the Connection Type and select the
appropriate Encapsulation Mode using the drop-down box.
Here are the available encapsulations for each connection type:
 PPPoA- VC/MUX, LLC/ENCAPSULATION
 PPPoE- LLC/SNAP BRIDGING, VC/MUX
 MER- LLC/SNAP-BRIDGING, VC/MUX
 IPoA- LLC/SNAP-ROUTING, VC MUX
 Bridging- LLC/SNAP-BRIDGING, VC/MUX
Un-tick this checkbox to begin manual
setup and display the following screen.