User manual

11
Chapter 4 Quick Setup
After the first login, the Quick Setup screen will appear. It is the default screen
when no connections exist. It allows for the configuration of connection settings.
4.1 Auto Quick Setup
This function provides an automated process to quickly setup a WAN connection.
The CT-5072T will auto-select the best available PVC profile, provided the ADSL link
is up (see section 2.2). If you prefer manual connection setup, go to section 4.2.
STEP 1: Tick the DSL Auto-connect checkbox  on the Quick Setup screen.
STEP 2: Click Next to start the setup process. Follow the online instructions to
complete the settings. This procedure will skip some advanced setup
procedures (such as PVC index and encapsulation selection).
STEP 3: After setup is complete the CT-5072T will reboot and display this
message.
NOTE: After the device reboots, the Device Information screen should appear.
If the browser does not refresh automatically, close it and restart.