User manual

3.3 Login Procedure

Perform the following steps to login to the web user interface.

NOTE: The default settings can be found in section 3.1.

STEP 1: Start the Internet browser and enter the default IP address for the device

in the Web address field. For example, if the default IP address is

192.168.1.1, type http://192.168.1.1.

NOTE: For local administration (i.e. LAN access), the PC running the browser

must be attached to the Ethernet, and not necessarily to the device.

For remote access (i.e. WAN), use the IP address shown on the Device

Information screen and login with remote username and password.

STEP 2: A dialog box will appear, such as the one below. Enter the default

username and password, as defined in section 3.1 Default Settings.

Click OK to continue.

NOTE: The login password can be changed later (see section 8.6.3)

STEP 3: After successfully logging in for the first time, you will reach this screen.

NOTES: If a PVC connection already exists then this Quick Setup screen will be

bypassed and the Device Information screen will display instead. The

selections available on the main menu (onscreen at left) are based upon

the configured connection(s) and user account privileges.