User`s manual

6.8 DSL
To access the DSL settings, First click On Advanced Setup and then click on DSL.
The DSL Settings dialog box allows you to select an appropriate modulation mode.
Note that this means the IAD uses one of the selected modulation modes to sync
with the DSLAM if two more modes are selected.
Option Description
G.dmt Sets G.Dmt if you want the system to use only G.Dmt mode
G.lite Sets G.lite if you want the system to use only G.lite mode
T1.413 Sets the T1.413 if you want the system to use only T1.413 mode
ADSL2 Enabled The device can support the functions of the ADSL2
AnnexL Enabled The device can support/enhance the long loop test
ADSL2+ Enabled The device can support the functions of the ADSL2+
AnnexM Enabled The device can support/enhance the data rate of both
upstream/downstream
Inner Pair Reserved only
Outer Pair Reserved only
Bitswap Enable Allows bitswaping function
SRA Enable Allows seamless rate adaptation
76