User`s manual

Traffic Class Name Enter name for traffic class.

Assign ATM Transmit Priority Select Low, Medium or High.

Mark IP Precedence Select between 0-7. The lower the digit

shows the higher the priority.

Mark IP Type Of Service Select either: Normal Service, Minimize

Cost, Maximize Reliability, Maximize

Throughput, Minimize Delay

Mark 802.1p if 802.1q is enabled on WAN Select between 0-7. The higher the

digit shows the higher the priority.

SET-1

Physical LAN Port Select between ENET(1-4), USB,

Wireless and Wireless_Guest.

Protocol User can select from: TCP, TCP/UDP,

UDP or ICMP.

Source IP Address Enter the source IP address.