User`s manual

7. The following screen will be displayed. To enable the wireless function, select the

box (by clicking on it) and input the SSID. Then, click Next.

8. The WAN Setup-Summary screen presents the entire configuration summary.

Click Save/Reboot if the settings are correct. Click Back if you wish to modify the

settings.

9. After clicking Save/Reboot, the IAD will save the configuration to the flash

memory, and reboot. The Web UI will not respond until the system is brought up

again. After the system is up, the Web UI will refresh to the Device Info page

automatically. The CT-6382T is ready for operation and the LEDs display as

described in the LED description tables.