User`s manual

SIP Grouping
Used to map which account to which line
you require.
FXS 1 and FXS 2 are phone ports 1 and 2.
DECT 1 and DECT2 are DECT line 1 and
DECT line 2.
PSTN route rule If PSTN route rule is “auto” , when a PSTN
call coming will ring the idle
phone(phone1 idle ring phone1,phone1
busy ring phone2)
If PSTN route rule is “fix”, when a PSTN
call coming will ring the phone that the
user selects from PSTN route data
(phone1, phone2 or both)
Emergency calls
Number 1 & 2
Emergency phone numbers. Note that
you need to change these numbers to
correspond with the emergency numbers
that are used in your country.
FAX mode: Use G711u (Pass-through) or T.38 when
sending a fax.
Max Digits Setup the maximum number of digits for
the phone number.
RFC2833 Outband DTMF Enable the special use of RTP packets to
transmit digit events.
RTP Payload Type for RFC2833 Payload types are defined in RFC 2833,
RTP Payload for DTMF Digits, Telephony
Tones and Telephony Signals. A payload
type is a number from 96 to 127 that
identifies the type of payload carried in
the packet. The payload type should be
identical on the GW and call agent.
104