User`s manual

41
PPP IP Extension
The PPP IP Extension is a special feature deployed by some service providers.
Unless your service provider specially requires this setup, do not select it.
The PPP IP Extension supports the following conditions:
 Allows only one PC on the LAN
 The public IP address assigned by the remote side using the PPP/IPCP protocol
is actually not used on the WAN PPP interface. Instead, it is forwarded to the
PC’s LAN interface through DHCP. Only one PC on the LAN can be connected
to the remote, since the DHCP server within the Multi-DSL Router has a single
IP address to assign to a LAN device.
 NAT and firewall are disabled when this option is selected.
 The Multi-DSL Router becomes the default gateway and DNS server to the PC
through DHCP using the LAN interface IP address.
 The Multi-DSL Router extends the IP subnet at the remote service provider to
the LAN PC. That is, the PC becomes a host belonging to the same IP subnet.
 The Multi-DSL Router bridges the IP packets between WAN and LAN ports,
unless the packet is addressed to the Router’s LAN IP address.
Use Static IP Address
Unless your service provider specially requires this setup, do not select it.
If selected, enter your static IP address.
Enable PPP Debug Mode
Enable the PPPoE debug mode. The system will put more PPP connection
information in System Log. But this is for debug, please don't enable in normal
usage.
2. Click Next to display the following screen.