User manual

Chapter 8 Diagnostics
The Diagnostics menu provides feedback on the connection status of the CT-5624
and the ADSL link. The individual tests are listed below. If a test displays a fail
status, click Rerun Diagnostic Tests at the bottom of this page to make sure
the fail status is consistent. If the test continues to fail, click Help and follow the
troubleshooting procedures.
Test Description
Ethernet Connection Pass: Indicates that the Ethernet interface from your
computer is connected to the LAN port of your DSL Router.
Fail: Indicates that the DSL Router does not detect the
Ethernet interface on your computer.
ADSL
Synchronization
Pass: Indicates that the DSL modem has detected a DSL
signal from the telephone company.
Fail: Indicates that the DSL modem does not detect a signal
from the telephone company’s DSL network.
- -
59