User manual

To configure the parameters, please reference Outgoing

table above.

7.4.2 MAC Filter

NOTE: This function is only available when in bridge mode. PPPoE, PPPoA,

IPoA and MER use IP Filtering (pg. 43) to perform a similar function.

Each network device has a unique 48-bit MAC address. This can be used to filter

(block or forward) packets based on the originating device. MAC filtering policy

and rules for the CT-5624 can be set according to the following procedure.

The policy FORWARDED means that all MAC layer frames will be FORWARDED

except those matching the rules specified in the following table. BLOCKED

means that all MAC layer frames will be BLOCKED except those matching the

rules specified in the following table. The default policy is FORWARDED. This

can be changed by clicking the Change Policy button.

- -