User manual

Filter Name Type a name for the filter rule.
Protocol User can select from: TCP, TCP/UDP, UDP or
ICMP.
Source IP address Enter source IP address.
Source Subnet Mask Enter source subnet mask.
Source Port (port or port:port) Enter source port number.
Destination IP address Enter destination IP address.
Destination Subnet Mask Enter destination subnet mask.
Destination port (port or port:port) Enter destination port number.
Incoming
Note: The default setting for all Incoming traffic is Blocked.
To add a filtering rule, simply click the Add button. The following screen will be
displayed.
- -
44