User manual

7.2 LAN
Configure the DSL Router IP Address and Subnet Mask for LAN interface. Save
button only saves the LAN configuration data. Save/Reboot button saves the LAN
configuration data and reboots the router to make the new configuration
effective.
IP Address: Enter the IP address for the LAN port.
Subnet Mask: Enter the subnet mask for the LAN port.
Enable IGMP Snooping: Enable by ticking the box.
Standard Mode
: In standard mode, multicast traffic will
flood to all bridge ports when no client subscribes to a multicast
group – even if IGMP snooping is enabled.
Blocking Mode
: In blocking mode, the multicast data traffic
will be blocked and not flood to all bridge ports when there are
no client subscriptions to any multicast group.
DHCP Server: To enable DHCP, select Enable DHCP server and enter starting
and ending IP addresses and the leased time. This setting
configures the router to automatically assign IP, default
gateway and DNS server addresses to every PC on your LAN.
- -
38