User manual

Chapter 7 Advanced Setup

This chapter includes the following sections:

WAN, LAN, NAT, Security, QoS, Routing, DNS, DSL, and Port Mapping

7.1 WAN

This screen shows the default WAN interface. Users can choose to Add, Edit, or

Remove these WAN interfaces. The Save/Reboot button saves the current

configuration and reboots the router.

VlanID This function means one can add an 802.1Q VLAN tag on PPPoE/MER or

Bridge mode. It means the packets are sent to WAN and a specific

VlanID (802.1Q tag) will be added in the Ethernet header. The VlanID

shows which 802.1Q tag will be added.

For further information consult the table in section 5.1 WAN.

- -